Showing 201–210 of 389 results

  • Intel® Core™ i9-13900KS Processor (36M Cache- up to 6.00 GHz)

    Essentials
    Product Collection,13th Generation Intel® Core™ i9 Processors
    Code Name,Products formerly Raptor Lake
    Vertical Segment,Desktop
    Processor Number,i9-13900KS
    Lithography,Intel 7
    Use Conditions,PC/Client/Tablet

    CPU Specifications
    Total Cores,24
    # of Performance-cores,8
    # of Efficient-cores,16
    Total Threads,32
    Max Turbo Frequency,6.00 GHz
    Intel® Thermal Velocity Boost Frequency,6.00 GHz
    Intel® Turbo Boost Max Technology 3.0 Frequency,5.80 GHz
    Performance-core Max Turbo Frequency,5.40 GHz
    Efficient-core Max Turbo Frequency,4.30 GHz
    Performance-core Base Frequency,3.20 GHz
    Efficient-core Base Frequency,2.40 GHz
    Cache,36 MB Intel® Smart Cache
    Total L2 Cache,32 MB
    Processor Base Power,150 W
    Maximum Turbo Power,253 W

    Supplemental Information
    Marketing Status,Launched
    Launch Date,Q1’23
    Embedded Options Available,No

    Memory Specifications
    Max Memory Size (dependent on memory type),128 GB
    Memory Types,Up to DDR5 5600 MT/s Up to DDR4 3200 MT/s
    Max # of Memory Channels,2
    Max Memory Bandwidth,89.6 GB/s
    ECC Memory Supported ,Yes

    Processor Graphics
    Processor Graphics,Intel® UHD Graphics 770
    Graphics Base Frequency,300 MHz
    Graphics Max Dynamic Frequency,1.65 GHz
    Graphics Output,eDP 1.4b | DP 1.4a | HDMI 2.1
    Execution Units,32
    Max Resolution (HDMI)‡,4096 x 2160 @ 60Hz
    Max Resolution (DP)‡,7680 x 4320 @ 60Hz
    Max Resolution (eDP – Integrated Flat Panel)‡,5120 x 3200 @ 120Hz
    DirectX* Support,12
    OpenGL* Support,4.5
    OpenCL* Support,3.0
    Multi-Format Codec Engines,2
    Intel® Quick Sync Video,Yes
    Intel® Clear Video HD Technology,Yes
    # of Displays Supported,4
    Device ID,0xA780

    Expansion Options
    Direct Media Interface (DMI) Revision,4.0
    Max # of DMI Lanes,8
    Scalability,1S Only
    PCI Express Revision,5.0 and 4.0
    PCI Express Configurations,Up to 1×16+4 | 2×8+4
    Max # of PCI Express Lanes,20

    Package Specifications
    Sockets Supported,FCLGA1700
    Max CPU Configuration,1
    TJUNCTION,100°C

    Advanced Technologies
    Intel® Gaussian & Neural Accelerator,3.0
    Intel® Thread Director,Yes
    Intel® Deep Learning Boost (Intel® DL Boost),Yes
    Intel® Speed Shift Technology,Yes
    Intel® Thermal Velocity Boost,Yes
    Intel® Turbo Boost Max Technology 3.0,Yes
    Intel® Turbo Boost Technology,2.0
    Intel® Hyper-Threading Technology,Yes
    Intel® 64,Yes
    Instruction Set,64-bit
    Instruction Set Extensions,Intel® SSE4.1 | Intel® SSE4.2 | Intel® AVX2
    Idle States,Yes
    Enhanced Intel SpeedStep® Technology,Yes
    Thermal Monitoring Technologies,Yes
    Intel® Volume Management Device (VMD),Yes

    Security & Reliability
    Intel® Standard Manageability (ISM),Yes
    Intel® Control-Flow Enforcement Technology,Yes
    Intel® AES New Instructions,Yes
    Secure Key,Yes
    Intel® OS Guard,Yes
    Intel® Trusted Execution Technology,Yes
    Execute Disable Bit,Yes
    Intel® Boot Guard,Yes
    Mode-based Execute Control (MBEC),Yes
    Intel® Stable IT Platform Program (SIPP),Yes
    Intel® Virtualization Technology with Redirect Protection (VT-rp),Yes
    Intel® Virtualization Technology (VT-x),Yes
    Intel® Virtualization Technology for Directed I/O (VT-d),Yes
    Intel® VT-x with Extended Page Tables (EPT),Yes

  • Intel® Pentium® Gold G7400 Processor (6M Cache- 3.70 GHz)

    Essentials Product Collection,Intel® Pentium® Gold Processor Series Code Name,Products formerly Alder Lake Vertical Segment,Desktop Processor Number,G7400 Marketing Status,Launched Launch Date,Q1’22 Lithography,Intel 7 Use Conditions,PC/Client/Tablet CPU Specifications Total Cores,2 # of Performance-cores,2 # of Efficient-cores,0 Total Threads,4 Performance-core Base Frequency,3.70 GHz Cache,6 MB Intel® Smart Cache Total L2 Cache,2.5 MB Processor Base Power,46 W Supplemental Information…

  • Kingston A400 240GB Internal SSD

    Features

    Incredible speeds plus rock-solid reliability.

    Kingston’s A400 solid-state drive dramatically improves the responsiveness of your existing system with incredible boot, loading and transfer times compared to mechanical hard drives. Powered by a latest gen controller for read and write speeds up to 500MB/s and 350MB/s1, this SSD is 10x faster than a traditional hard drive for higher performance, ultra-responsive multi-tasking and an overall faster system. Also more reliable and durable than a hard drive.

    • Fast start-up, loading and file transfers
    • More reliable and durable than a hard drive
    • Multiple capacities with space for applications or a hard drive replacement

    Specification

    Form factor 2.5″
    Interface SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s)
    Capacities 240GB
    Controller 2Ch
    NAND TLC
    Baseline Performance1 Data Transfer (ATTO) 240GB — up to 500MB/s Read and 350MB/s Write
    Power Consumption 0.195W Idle / 0.279W Avg / 0.642W (MAX) Read / 1.535W (MAX) Write
    Storage temperature -40°C~85°C
    Operating temperature 0°C~70°C
    Dimensions 100.0mm x 69.9mm x 7.0mm
    Weight 41g
    Vibration operating 2.17G Peak (7–800Hz)
    Vibration non-operating 20G Peak (10–2000Hz)
    Life expectancy 1 million hours MTBF
    Total Bytes Written (TBW) 240GB: 80TB
    Warranty 3 Years
    Note ***Features, Price and Specifications are subject to change without notice.
    • CAPACITY 240GB
    • SERIES A400
    • FORM FACTOR 2.5 INCH

  • Kingston Fury 16GB 3600MHz DDR4 CL18 DIMM Fury Beast Black, KF436C18BB/16

    Technical Details

  • Kingston Fury Beast 16GB (16GBx1) DDR4 3200MHz Desktop RAM (Black)

    Kingston FURY KF432C16BB/16 is a 2G x 64-bit (16GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-20-20 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

    Features:

    • Power Supply: VDD = 1.2VTypical
    • VDDQ = 1.2V Typical
    • VPP = 2.5V Typical
    • VDDSPD = 2.2V to 3.6V
    • On-Die termination (ODT)
    • 16 internal banks; 4 groups of 4 banks each
    • Bi-Directional Differential Data Strobe
    • 8 bit pre-fetch
    • Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
    • Height 1.34” (34mm), w/heatsink

    Specifications:

    CAPACITY 16GB
    SPEED 3200MHz
    CL(IDD) 16 cycles
    VOLTAGE 1.35V
    XMP READY Yes
    Row Active Time (tRASmin) 32ns(min.)
    UL Rating 94 V – 0
    Operating Temperature 0o C to +85o C
    Storage Temperature -55o C to +100o C
    Warranty Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

  • Kingston FURY Beast 16GB (16GBx1) DDR5 5200MHz RAM

    Features:

    Kingston FURY Beast DDR5 Memory

    Kingston FURY™ Beast DDR5 memory brings the latest cutting-edge technology for next-gen gaming platforms. Taking speed, capacity and reliability even further, DDR5 arrives with an arsenal of enhanced features, like on-die ECC (ODECC) for improved stability at extreme speeds, dual 32-bit subchannels for increased efficiency and an on-module power management integrated circuit (PMIC) to provide juice where it’s needed most.

    Superior speed advancements with double the banks from 16 to 32 and double the burst length from 8 to 16 take DDR5 memory, your gaming experience and your overall system applications to the next level of performance.

    Whether you’re pushing the limits in your gaming with the most extreme settings, live streaming at 4K+ or pushing large animations and 3D rendering, Kingston FURY Beast DDR5 memory is the level-up needed, while seamlessly bridging style and unleashing performance.

    Additionally, it utilises Intel® XMP 3.0, a new overclock spec that includes two customisable profiles for speeds and timings.

    • Greater performance starting at 5200MT/s*
    • Improved stability for overclocking
    • Increased efficiency
    • Intel® XMP 3.0-Ready and Certified
    • Qualified by the world’s leading motherboard manufacturers1
    • Plug N Play at 5200MT/s*2
    • Low-profile heat spreader design

    Specifications:

    Capacities 16GB
    Speeds 5200MT/s
    Latencies CL40
    Voltage 1.25V
    Operating temperature 0°C to 85°C
    Dimensions 133.35 mm x 34.9 mm x 6.62 mm
    Warranty Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

  • Kingston FURY Beast 32GB (16GBx2) DDR5 5200MHz RAM

    Features:

    FURY KF552C40BBK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-5200 CL40 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-5200 at a low latency timing of 40-40-40 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

    • Power Supply: VDD = 1.1V Typical

    • VDDQ = 1.1V Typical

    • VPP = 1.8V Typical

    • VDDSPD = 1.8V to 2.0V

    • On-Die ECC

    • Height 1.37” (34.9mm), w/heatsink

    Specification:

    CL(IDD) 40 cycles
    Row Cycle Time (tRCmin) 48ns(min.)
    Refresh to Active/Refresh Command Time (tRFCmin) 295ns(min.)
    Row Active Time (tRASmin) 32ns(min.)
    UL Rating 94 V – 0
    Operating Temperature 0o C to +85o C
    Storage Temperature -55o C to +100o C
    Warranty Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

     

  • Kingston Fury Beast 32GB (32GBx1) DDR4 3200MHz Desktop Ram (Black)

    Features:

    • Cost-efficient, high-performance DDR4 upgrade
    • Speeds up to 3733MT/s and kit capacity up to 128GB
    • Intel® XMP-ready and XMP Certified
    • Ready for AMD Ryzen™
    • Low-profile heat spreader design
    • Plug N Play functionality at 3200MT/s

    Kingston FURY Beast DDR4 Memory

    The Kingston FURY™ Beast DDR4 provides a powerful performance boost for gaming, video editing and rendering with speeds of up to 3733MT/s*. This cost-effective upgrade is available in 2666MT/s–3733MT/s speeds, CL15–19 latencies, single-module capacities of 4GB–32GB and kit capacities of 8GB–128GB. It features Plug N Play automatic overclocking at 3200MT/s1 and is both Intel® XMP-ready, XMP Certified and Ready for AMD Ryzen™. FURY Beast DDR4 stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

    High-performance, cost-effective upgrade

    Kingston FURY Beast DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump start their sluggish system.

    Intel® XMP-Ready and XMP Certified

    Designed to maximise the performance of our memory modules, our engineers have predefined Intel Extreme Memory Profiles to reach speeds of up to 3200MT/s

    Ready for AMD Ryzen™

    Get memory that’s Ready for Ryzen and will seamlessly integrate with your AMD-based system. A reliable, compatible performance boost for your build.

    Low-profile heat spreader

    The sleek-looking heat spreader is a great upgrade for your battle station’s style.

    Plug N Play – Automatic overclocking at 3200MT/s

    A simple and easy Plug N Play upgrade, Kingston FURY Beast DDR4 will auto-overclock itself to the highest listed speed allowed by the system BIOS.

    Specification:

    Capacities Singles: 32GB
    Frequencies 3200MT/s
    Latencies CL-16
    Voltage 1.35V
    Operating Temperature 0°C to 85°C
    Dimensions 133.35mm x 34.1mm x 7.2mm
    Warranty Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

  • Kingston Fury Beast 8GB (8GBx1) DDR4 3200MHz Desktop RAM (Black)

    Kingston FURY Beast DDR4 Memory

    The Kingston FURY Beast DDR4 provides a powerful performance boost for gaming, video editing and rendering with speeds of 3200MHz. This cost-effective upgrade is available in 3200MHz speed, CL 16-18-18 latency, single-module capacity of 8GB. It features Plug N Play automatic overclocking at 2666MHz and is both Intel XMP-ready, XMP Certified and Ready for AMD Ryzen. FURY Beast DDR4 stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a limited lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

    Features

    • Cost-efficient, high-performance DDR4 upgrade
    • Speed of 3200MHz and kit capacity of 8GB
    • Intel XMP-ready and XMP Certified
    • Ready for AMD Ryzen
    • Low-profile heat spreader design
    • Plug N Play functionality at 2666MHz

     

    High-performance, cost-effective upgrade

    Kingston FURY Beast DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump-start their sluggish system.

    Intel XMP-Ready and XMP Certified

    Designed to maximise the performance of our memory modules, our engineers have predefined Intel Extreme Memory Profiles to reach speeds of up to 3733MHz*.

    *FURY Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. FURY Plug N Play DDR4 products support XMP 2.0 specifications, so overclocking can also be achieved by enabling the built-in XMP profile.

    Ready for AMD Ryzen

    Get memory that’s Ready for Ryzen and will seamlessly integrate with your AMD-based system. A reliable, compatible performance boost for your build.

    Low-profile heat spreader

    The sleek-looking new heat spreader is a great upgrade for your battle station’s style.

    Plug N Play – Automatic overclocking at 2666MHz

    A simple and easy Plug N Play upgrade, Kingston FURY Beast DDR4 will auto-overclock itself to the highest listed speed allowed by the system BIOS.

    Specifications

    FORM FACTOR UDIMM
    XMP READY Yes
    PLUG N PLAY Yes
    SPEED 3200MHz
    LATENCY CL16
    VOLTAGE 1.35V
    MODULE CAPACITY 8GB
    SINGLE MODULE Yes
    COLOR Black
    OPERATING TEMPERATURE 0°C to 85°C
    HEIGHT 34.1mm
    WARRANTY Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

  • Kingston Fury Beast 8GB (8GBx1) DDR4 3600MHz Desktop Ram (Black)

    Kingston FURY Beast DDR4 Memory

    The Kingston FURY Beast DDR4 provides a powerful performance boost for gaming, video editing and rendering with speeds of 3600MHz. This cost-effective upgrade is available in 3600MHz speed, CL 17-21-21 latency, single-module capacity of 8GB. It features Plug N Play automatic overclocking at 2666MHz and is both Intel XMP-ready, XMP Certified and Ready for AMD Ryzen. FURY Beast DDR4 stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a limited lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

    Features

    • Cost-efficient, high-performance DDR4 upgrade
    • Speed of 3600MHz and kit capacity of 8GB
    • Intel XMP-ready and XMP Certified
    • Ready for AMD Ryzen
    • Low-profile heat spreader design
    • Plug N Play functionality at 3600MHz

     

    High-performance, cost-effective upgrade

    Kingston FURY Beast DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump-start their sluggish system.

    Intel XMP-Ready and XMP Certified

    Designed to maximise the performance of our memory modules, our engineers have predefined Intel Extreme Memory Profiles to reach speeds of up to 3600MHz*.

    *FURY Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. FURY Plug N Play DDR4 products support XMP 2.0 specifications, so overclocking can also be achieved by enabling the built-in XMP profile.

    Ready for AMD Ryzen

    Get memory that’s Ready for Ryzen and will seamlessly integrate with your AMD-based system. A reliable, compatible performance boost for your build.

    Low-profile heat spreader

    The sleek-looking new heat spreader is a great upgrade for your battle station’s style.

    Plug N Play – Automatic overclocking at 3600MHz

    A simple and easy Plug N Play upgrade, Kingston FURY Beast DDR4 will auto-overclock itself to the highest listed speed allowed by the system BIOS.

    Specifications

    FORM FACTOR UDIMM
    XMP READY Yes
    PLUG N PLAY Yes
    SPEED 3600MHz
    LATENCY CL17
    VOLTAGE 1.35V
    MODULE CAPACITY 8GB
    SINGLE MODULE Yes
    COLOR Black
    OPERATING TEMPERATURE 0°C to 85°C
    HEIGHT 34.1mm
    WARRANTY Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.