Showing 151–160 of 389 results

  • EVGA SuperNova 1300 GT 1300 Watt 80 Plus Gold SMPS

    Features:

    • Unbeatable EVGA 10 Year Warranty and unparalleled EVGA Customer Support
    • Fully Modular to reduce clutter and improve airflow
    • EVGA ECO Intelligent Thermal Control System eliminates fan noise at low to medium loads
    • 80 PLUS Gold certified, with 90% (115VAC) / 92% (220VAC~240VAC) efficiency or higher under typical loads
    • 100% Japanese Capacitors ensure long-term reliability
    • Fluid Dynamic Bearing Fan for ultra-quiet operation and increased lifespan.
    • Heavy-duty protections, including OVP (Over Voltage Protection), UVP (Under Voltage Protection), OCP (Over Current Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and Dual OTP (Over Temperature Protection)

    Specifications:

     CABLE LENGTH 
     ATX Cable  1x 600mm (m)
     EPS Cable  2x 750mm (m)
     PCIe Cable  4x 750mm (m), 2x 750mm, 900mm   (m)
     SATA Cable  4x 550mm, 650mm, 750mm (m)
     Four-Pin Peripheral Cable  2x 550mm, 650mm, 750mm,   850mm(m)
     Floppy Adapter  1x Molex to FDD Adapter
     AC Power  1x 1500mm (m)
     Modular Cable Type  Full
     Molex to FDD  1x
     CONNECTOR QUANTITY  
     24 Pin ATX  1x
     EPS (CPU)  2x 8pin(4+4)
     PCIe  8x 8pin(6+2)
     SATA  12x
     Four-Pin Peripheral  8x
     Floppy  1x
     POWER SPECS
     Total wattage  1300W
     ADDITIONAL DETAILS 
     Operating Temperature  +50° C
     Japanese Capacitors  100%
     ECO Mode  Yes
     MTBF  100,000 Hours
     Net Weight  9.20 lbs
     Size  86mm (H) x 150mm (W) x 180mm   (L)
     Approvals  TUV, CB, CE, FCC, RCM, cTUVus,   WEEE, RoHS
    Compliance with ErP Lot 3 2014   Requirement
     Fan Size / Bearing  135mm Fluid Dynamic Bearing
     Warranty  10 Years
     Note *** Features, Price, Specifications are subject to change without notice.
    • Wattage 1300 Watt
    • Certification 80+ GOLD
    • Modular FULLY MODULAR
    • PCIe Connector (6+2) 8
    • SATA Connector 12
    • Peripheral (4-Pin) 8

  • G.Skill Flare X5 32GB (16GBx2) DDR5 6000MHz Desktop Ram (Matte Black)

    Features:

    Designed for AMD, Engineered for Performance

    Created from high-quality hand-screened DDR5 DRAM ICs, Flare X5 memory kits are designed for performance on AMD platforms. Featuring AMD EXPO (EXtended Profiles for Overclocking) profiles, Flare X5 allows simple one-step memory overclocking through BIOS on supported motherboards.

    Matte Minimalism

    Available in anodized matte black, the Flare X5 memory module features a minimalistic design inspired by classic racing stripes and grills, and is ideal for a variety of build themes with its simple design.

    Created for Quality

    Each Flare X5 memory kit is created with hand-screened ICs and tested under G.SKILL’s rigorous validation process to ensure outstanding quality.

    Compact Low-Profile Design

    Featuring a low-profile height of just 33mm, the Flare X5 is an ideal choice for compact PC builds or systems with large CPU coolers

    AMD EXPO Support

    Just set and go. Programmed with AMD EXPO overclocking profiles, the only thing that stands between you and awesome performance is a simple BIOS setting

    Limited Lifetime Warranty

    All G.SKILL memory products come with a limited lifetime warranty and the G.SKILL technical team is always ready to provide consumers with complete technical support via online forum, telephone, and email.

    Specification:

    Memory Type DDR5
    Capacity 32GB (16GBx2)
    Multi-Channel Kit Dual Channel Kit
    Tested Speed 6000 MT/s
    Tested Voltage 1.35V
    Registered/Unbuffered Unbuffered
    Error Checking Non-ECC
    SPD Speed (Default) 4800 MT/s
    SPD Voltage (Default) 1.10V
    Fan Included No
    Features AMD EXPO Profile Ready
    Warranty Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

  • G.Skill Flare X5 32GB (16GBx2) DDR5 6000MHz Desktop Ram (Matte Black)

    eatures:

    Designed for AMD, Engineered for Performance

    Created from high-quality hand-screened DDR5 DRAM ICs, Flare X5 memory kits are designed for performance on AMD platforms. Featuring AMD EXPO (EXtended Profiles for Overclocking) profiles, Flare X5 allows simple one-step memory overclocking through BIOS on supported motherboards.

    Matte Minimalism

    Available in anodized matte black, the Flare X5 memory module features a minimalistic design inspired by classic racing stripes and grills, and is ideal for a variety of build themes with its simple design.

    Created for Quality

    Each Flare X5 memory kit is created with hand-screened ICs and tested under G.SKILL’s rigorous validation process to ensure outstanding quality.

    Compact Low-Profile Design

    Featuring a low-profile height of just 33mm, the Flare X5 is an ideal choice for compact PC builds or systems with large CPU coolers

    AMD EXPO Support

    Just set and go. Programmed with AMD EXPO overclocking profiles, the only thing that stands between you and awesome performance is a simple BIOS setting

    Limited Lifetime Warranty

    All G.SKILL memory products come with a limited lifetime warranty and the G.SKILL technical team is always ready to provide consumers with complete technical support via online forum, telephone, and email.

    Specification:

    Memory Type DDR5
    Capacity 32GB (16GBx2)
    Multi-Channel Kit Dual Channel Kit
    Tested Speed 6000 MT/s
    Tested Voltage 1.35V
    Registered/Unbuffered Unbuffered
    Error Checking Non-ECC
    SPD Speed (Default) 4800 MT/s
    SPD Voltage (Default) 1.10V
    Fan Included No
    Features AMD EXPO Profile Ready
    Warranty Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

  • G.Skill Ripjaws S5 32GB (16GBx2) DDR5 5600MHz Desktop RAM (Black)

    Features:

    Ripjaws S5 is a performance DDR5 DRAM memory series made with hand-screened memory ICs that passed G.SKILL rigorous validation tests. Each Ripjaws S5 memory kit strikes an ideal balance between performance, compatibility, and stability and is available in matte black or matte white aluminum heatspreaders.

    High-Speed Memory Performance with Intel Core Platform

    G.SKILL is dedicated to develop high performance memory on each new Intel platform generation. Developed on the Intel Core platform, Ripjaws S5 taps into the speed potential of DDR5 to bring a whole new level of performance to worldwide overclockers and PC enthusiasts.

    Experience the Evolution of Speed

    Built upon decades of experience in developing high-performance memory, the Ripjaws S5 series DDR5 DRAM memory is engineered with hand-screened ICs and designed for high-speed performance.

    Super Speed in Style

    The next-gen Ripjaws S5 series adopts a minimalistic design inspired by classic racing stripes and grills, available in matte black or matte white to match a wide variety of PC build themes.

    Compact Low-Profile Design

    Featuring a low-profile height of just 33mm, the Ripjaws S5 memory is an ideal choice for compact PC builds or systems with large CPU coolers

    Engineered for Exceptional DDR5 Experience

    Each and every Ripjaws S5 memory kit is tested under G.SKILL’s rigorous validation process to ensure outstanding quality.

    XMP 3.0 Support

    Just set and go. Programmed with the latest Intel XMP 3.0 profiles, the only thing between you and overclocked performance is a simple BIOS setting

    Limited Lifetime Warranty

    All G.SKILL memory products come with a limited lifetime warranty and the G.SKILL technical team is always ready to provide consumers with complete technical support via online forum, telephone, and email.

    Specifications:

    Memory Type DDR5
    Capacity 32GB (16GBx2)
    Multi-Channel Kit Dual Channel Kit
    Tested Speed 5600 MT/s
    Tested Latency 36-36-36-89
    Tested Voltage 1.20V
    Registered/Unbuffered Unbuffered
    Error Checking Non-ECC
    SPD Speed 4800 MT/s
    SPD Voltage 1.10V
    Fan Included No
    Features Intel XMP 3.0 (Extreme Memory Profile) Ready
    Warranty Limited Lifetime
    Note *** Features, Price, Specifications are subject to change without notice.

  • G.Skill Ripjaws V 16GB (1*16GB) DDR4 3600 MHz Desktop Memory RAM – F4-3600C18S-16GVK

    Technical Details

  • G.Skill Ripjaws V 16GB (16GBx1) DDR4 3200MHz

    Features

    Feel the Rush of Ripjaws V

    As the latest addition to the classic Ripjaws family, Ripjaws V series is the newest DDR4 memory designed for maximum compatibility and cutting-edge performance with the latest Intel® Core™ processors. Built with the finest components, tested under the most rigorous conditions, and offered in five color options, Ripjaws V is the perfect choice for building a new performance system or for a simple memory upgrade.

    Blazing Fast Transfer Speed

    Available in a wide range of frequency options from standard DDR4-2133MHz to a blistering DDR4-4000MHz, Ripjaws V lets you enjoy a faster computing experience for gaming, video & image editing, rendering, and data processing.

    Rigorously Tested for Compatibility and Reliability

    Each and every Ripjaws V DDR4 memory kit is tested with G.SKILL’s rigorous validation process on all major performance motherboard brands to ensure the best-in-class reliability and compatibility across the widest selection of motherboards.

    Color It Up

    Not only is the Ripjaws V designed with a sleek new look, but also available in five different colors: Blazing Red, Steel Blue, Radiant Silver, Gunmetal Gray, and Classic Black. Whether you’re a modder seeking matching hues or looking to build a stunning new system, Ripjaws V is a superb selection.

    42mm Module Height

    Continuing the tradition of aftermarket CPU cooler compatibility, Ripjaws V is designed with a 42mm module height suitable for most oversized CPU heatsinks.

    Up to 128GB Ultra High Capacity

    Ripjaws V offers various capacity configurations, not only with modules of 4GB and 8GB, but also in ultra-high 16GB capacities for up to 128GB (16GBx8). The possibilities are endless!

    Power Efficient

    Designed with a low voltage of 1.2V~1.35V at DDR4 standard, this lowers the memory voltage requirement by 20% from DDR3 memory kits! Now your system can perform even faster without becoming an expensive appliance heater.

    XMP 2.0 Support

    Just set and go. Programmed with the latest Intel XMP 2.0 profiles, the only thing between you and extreme performance is a simple setting.

    Limited Lifetime Warranty

    All G.SKILL memory products come with a limited lifetime warranty and the G.SKILL technical team is always ready to provide consumers with complete technical support via online forum, telephone, and email.

    Specifications

    Model F4-3200C16S-16GVK
    Series Ripjaws V
    Memory Type DDR4
    Capacity 16GB (16GBx1)
    Multi-Channel Kit Single Channel Kit
    Tested Speed 3200MHz
    Tested Latency 16-18-18-38
    Tested Voltage 1.35V
    Registered/Unbuffered Unbuffered
    Error Checking Non-ECC
    SPD Speed 2133MHz
    SPD Voltage 1.20V
    Fan lncluded No
    Height 42 mm / 1.65 inch
    Features Intel XMP 2.0 (Extreme Memory Profile) Ready
    Additional Notes Rated XMP frequency & stability depends on MB & CPU capability.
    Warranty Lifetime
    Note ***Features, Price and Specifications are subject to change without notice.

  • G.Skill Ripjaws V 8GB (8GBx1) DDR4 3600MHz

    Features

    G.skill (F4-3600C18S-8GVK) is Ripjaws V 16GB  DDR4 2400MHz Desktop RAM. Feel the Rush of Ripjaws V as the latest addition to the classic Ripjaws family. Ripjaws V series is the newest   DDR4 memory designed for maximum compatibility.

    Specifications

    Model F4-3600C18S-8GVK
    Series Ripjaws V
    Memory Type DDR4
    Capacity 8GB (8GBx1)
    Multi-Channel Kit Single Channel Kit
    Tested Speed 3600MHz
    Tested Latency 18-22-22-42
    Tested Voltage 1.35V
    Registered/Unbuffered Unbuffered
    Error Checking Non-ECC
    SPD Speed 2133MHz
    SPD Voltage 1.2V
    Fan lncluded No
    Features Intel XMP 2.0 (Extreme Memory Profile)
    Warranty Limited Lifetime

  • Gigabyte B760M GAMING X (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
      2. L3 cache varies with CPU

      (Please refer “CPU Support List” for more information.)

    • Chipset
      1. Intel® B760 Express Chipset
    • Memory
      1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s memory modules
      2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz
        * Support for DisplayPort 1.2 version and HDCP 2.3
      2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® Audio CODEC
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
      4. Support for S/PDIF Out
    • LAN
      1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB)
      2. 4 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

    • USB

      Chipset:

      1. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
      2. 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
      3. 1 x USB 2.0/1.1 port on the back panel

      Chipset+2 USB 2.0 Hubs:

      1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 1 x 8-pin ATX 12V power connector
      3. 1 x CPU fan header
      4. 3 x system fan headers
      5. 2 x addressable LED strip headers
      6. 2 x RGB LED strip headers
      7. 2 x M.2 Socket 3 connectors
      8. 4 x SATA 6Gb/s connectors
      9. 1 x front panel header
      10. 1 x front panel audio header
      11. 1 x S/PDIF Out header
      12. 1 x USB Type-C® header, with USB 3.2 Gen 2 support
      13. 1 x USB 3.2 Gen 1 header
      14. 2 x USB 2.0/1.1 headers
      15. 2 x Thunderbolt™ add-in card connectors
      16. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      17. 1 x serial port header
      18. 1 x Q-Flash Plus button
      19. 1 x reset jumper
      20. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 3 x USB 3.2 Gen 1 ports
      2. 5 x USB 2.0/1.1 ports
      3. 1 x HDMI 2.0 port
      4. 1 x DisplayPort
      5. 1 x RJ-45 port
      6. 3 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan speed control function is supported will depend on the fan you install.
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. Micro ATX Form Factor; 24.4cm x 24.4cm

  • Gigabyte Z790 AERO G (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors*
      2. L3 cache varies with CPU

      * Please refer to “CPU Support List” for more information.

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x USB Type-C® port, supporting USB 3.2 Gen 2 and DisplayPort video outputs and a maximum resolution of 4096×2304@60 Hz
        * Support for drawing tablets and 20V@3A of power delivery.
        * Support for DisplayPort 1.4 version and HDR.
      2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.

      (Graphics specifications may vary depending on CPU or graphics card support.)

    • Audio
      1. Realtek® ALC1220-VB CODEC
        * The back panel line out jack supports DSD audio.
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
      4. Support for S/PDIF Out
    • LAN
      1. Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Wireless Communication module

      Intel® Wi-Fi 6E AX211

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

      (Actual data rate may vary depending on environment and equipment.)

    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * The PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot operates at up to x8 mode when a device is installed in the M2C_CPU connector
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
      2. 1 x PCI Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB)
      3. 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
      4. 4 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

    • USB

      Chipset:

      1. 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (1 port on the back panel, 1 port available through the internal USB header)
      2. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support
      3. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
      4. 2 x USB 3.2 Gen 1 ports available through the internal USB header
      5. 2 x USB 2.0/1.1 ports on the back panel

      Chipset+USB 3.2 Gen 1 Hub:

      1. 4 x USB 3.2 Gen 1 ports on the back panel

      Chipset+USB 2.0 Hub:

      1. 4 x USB 2.0/1.1 ports available through the internal USB headers
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 1 x 8-pin ATX 12V power connector
      3. 1 x 4-pin ATX 12V power connector
      4. 1 x CPU fan header
      5. 1 x water cooling CPU fan header
      6. 4 x system fan headers
      7. 2 x system fan/water cooling pump headers
      8. 2 x addressable LED strip headers
      9. 2 x RGB LED strip headers
      10. 5 x M.2 Socket 3 connectors
      11. 4 x SATA 6Gb/s connectors
      12. 1 x front panel header
      13. 1 x front panel audio header
      14. 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support
      15. 1 x USB 3.2 Gen 1 header
      16. 2 x USB 2.0/1.1 headers
      17. 1 x noise detection header
      18. 2 x Thunderbolt™ add-in card connectors
      19. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      20. 1 x serial port header
      21. 1 x Q-Flash Plus button
      22. 1 x reset button
      23. 1 x reset jumper
      24. 2 x temperature sensor headers
      25. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 2 x USB 2.0/1.1 ports
      2. 2 x SMA antenna connectors (2T2R)
      3. 4 x USB 3.2 Gen 1 ports
      4. 1 x DisplayPort In port
      5. 1 x HDMI 2.0 port
      6. 2 x USB 3.2 Gen 2 Type-A ports (red)
      7. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
      8. 1 x USB Type-C® port (DisplayPort), with USB 3.2 Gen 2 support
      9. 1 x RJ-45 port
      10. 1 x optical S/PDIF Out connector
      11. 2 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
      7. Noise detection
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. ATX Form Factor; 30.5cm x 24.4cm

  • Gigabyte Z790 AORUS ELITE (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
      2. L3 cache varies with CPU

      (Please refer “CPU Support List” for more information.)

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.
      2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60
        * Support for DisplayPort 1.2 version and HDCP 2.3

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® Audio CODEC
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
      4. Support for S/PDIF Out
    • LAN
      1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
      2. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4 SSD support) (M2M_SB)
      3. 6 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices

      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
      * Refer to “2-8 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

    • USB

      Chipset:

      1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support
      2. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
      3. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
      4. 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)

      Chipset+2 USB 2.0 Hubs:

      1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x CPU fan header
      4. 1 x water cooling CPU fan header
      5. 3 x system fan headers
      6. 1 x system fan/water cooling pump header
      7. 2 x addressable LED strip headers
      8. 2 x RGB LED strip headers
      9. 4 x M.2 Socket 3 connectors
      10. 6 x SATA 6Gb/s connectors
      11. 1 x front panel header
      12. 1 x front panel audio header
      13. 1 x USB Type-C® header, with USB 3.2 Gen 2 support
      14. 1 x USB 3.2 Gen 1 header
      15. 2 x USB 2.0/1.1 headers
      16. 2 x Thunderbolt™ add-in card connectors
      17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      18. 1 x reset button
      19. 1 x Q-Flash Plus button
      20. 1 x Clear CMOS button
      21. 1 x reset jumper
      22. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
      2. 2 x USB 3.2 Gen 2 Type-A ports (red)
      3. 3 x USB 3.2 Gen 1 ports
      4. 4 x USB 2.0/1.1 ports
      5. 1 x HDMI 2.0 port
      6. 1 x DisplayPort
      7. 1 x RJ-45 port
      8. 1 x optical S/PDIF Out connector
      9. 2 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. ATX Form Factor; 30.5cm x 24.4cm