Showing 11–20 of 96 results

  • Gigabyte Z790 AORUS ELITE (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
      2. L3 cache varies with CPU

      (Please refer “CPU Support List” for more information.)

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.
      2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60
        * Support for DisplayPort 1.2 version and HDCP 2.3

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® Audio CODEC
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
      4. Support for S/PDIF Out
    • LAN
      1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
      2. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4 SSD support) (M2M_SB)
      3. 6 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices

      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
      * Refer to “2-8 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

    • USB

      Chipset:

      1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support
      2. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
      3. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
      4. 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)

      Chipset+2 USB 2.0 Hubs:

      1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x CPU fan header
      4. 1 x water cooling CPU fan header
      5. 3 x system fan headers
      6. 1 x system fan/water cooling pump header
      7. 2 x addressable LED strip headers
      8. 2 x RGB LED strip headers
      9. 4 x M.2 Socket 3 connectors
      10. 6 x SATA 6Gb/s connectors
      11. 1 x front panel header
      12. 1 x front panel audio header
      13. 1 x USB Type-C® header, with USB 3.2 Gen 2 support
      14. 1 x USB 3.2 Gen 1 header
      15. 2 x USB 2.0/1.1 headers
      16. 2 x Thunderbolt™ add-in card connectors
      17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      18. 1 x reset button
      19. 1 x Q-Flash Plus button
      20. 1 x Clear CMOS button
      21. 1 x reset jumper
      22. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
      2. 2 x USB 3.2 Gen 2 Type-A ports (red)
      3. 3 x USB 3.2 Gen 1 ports
      4. 4 x USB 2.0/1.1 ports
      5. 1 x HDMI 2.0 port
      6. 1 x DisplayPort
      7. 1 x RJ-45 port
      8. 1 x optical S/PDIF Out connector
      9. 2 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. ATX Form Factor; 30.5cm x 24.4cm

  • Gigabyte Z790 AORUS ELITE AX (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
      2. L3 cache varies with CPU

      (Please refer “CPU Support List” for more information.)

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.
      2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60
        * Support for DisplayPort 1.2 version and HDCP 2.3

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® Audio CODEC
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
      4. Support for S/PDIF Out
    • LAN
      1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Wireless Communication module

      Intel® Wi-Fi 6E AX211

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
        * Actual data rate may vary depending on environment and equipment.
    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
      2. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4 SSD support) (M2M_SB)
      3. 6 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices

      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
      * Refer to “2-8 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

    • USB

      Chipset:

      1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support
      2. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
      3. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
      4. 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)

      Chipset+2 USB 2.0 Hubs:

      1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x CPU fan header
      4. 1 x water cooling CPU fan header
      5. 3 x system fan headers
      6. 1 x system fan/water cooling pump header
      7. 2 x addressable LED strip headers
      8. 2 x RGB LED strip headers
      9. 4 x M.2 Socket 3 connectors
      10. 6 x SATA 6Gb/s connectors
      11. 1 x front panel header
      12. 1 x front panel audio header
      13. 1 x USB Type-C® header, with USB 3.2 Gen 2 support
      14. 1 x USB 3.2 Gen 1 header
      15. 2 x USB 2.0/1.1 headers
      16. 2 x Thunderbolt™ add-in card connectors
      17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      18. 1 x reset button
      19. 1 x Q-Flash Plus button
      20. 1 x Clear CMOS button
      21. 1 x reset jumper
      22. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
      2. 2 x USB 3.2 Gen 2 Type-A ports (red)
      3. 3 x USB 3.2 Gen 1 ports
      4. 4 x USB 2.0/1.1 ports
      5. 2 x SMA antenna connectors (2T2R)
      6. 1 x HDMI 2.0 port
      7. 1 x DisplayPort
      8. 1 x RJ-45 port
      9. 1 x optical S/PDIF Out connector
      10. 2 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. ATX Form Factor; 30.5cm x 24.4cm

  • Gigabyte Z790 AORUS MASTER (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors*
      2. L3 cache varies with CPU

      * Please refer to “CPU Support List” for more information.

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz
        * Support for DisplayPort 1.2 version and HDCP 2.3

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® ALC1220-VB CODEC
        * The front panel line out jack supports DSD audio.
      2. ESS ES9118 DAC chip
      3. Support for DTS:X® Ultra
      4. High Definition Audio
      5. 2/4/5.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 5.1-channel audio, access the audio software for audio settings.
      6. Support for S/PDIF Out
    • LAN
      1. Marvell® AQtion AQC113C 10GbE LAN chip
        (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)
    • Wireless Communication module

      Intel® Killer™ Wi-Fi 6E AX1690

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

      (Actual data rate may vary depending on environment and equipment.)

    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * The PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot operates at up to x8 mode when a device is installed in the M2C_CPU connector.
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)
      2. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 2280/2260 PCIe 4.0 x4/x2 SSD support) (M2P_SB)
      3. 1 x M.2 connector (Socket 3, M key, type 2280/2260 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
      4. 4 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices
      RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices

    • USB

      Chipset:

      1. 3 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (2 ports on the back panel, 1 port available through the internal USB header)

      Chipset+2 USB 3.2 Gen 2 Hubs:

      1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support
      2. 7 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

      Chipset+2 USB 3.2 Gen 1 Hubs:

      1. 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

      Chipset+USB 2.0 Hub:

      1. 4 x USB 2.0/1.1 ports available through the internal USB headers
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x CPU fan header
      4. 1 x water cooling CPU fan header
      5. 4 x system fan headers
      6. 4 x system fan/water cooling pump headers
      7. 2 x addressable LED strip headers
      8. 2 x RGB LED strip headers
      9. 5 x M.2 Socket 3 connectors
      10. 4 x SATA 6Gb/s connectors
      11. 1 x front panel header
      12. 1 x front panel audio header
      13. 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support
      14. 2 x USB 3.2 Gen 1 headers
      15. 2 x USB 2.0/1.1 headers
      16. 1 x noise detection header
      17. 2 x Thunderbolt™ add-in card connectors
      18. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      19. 1 x power button
      20. 1 x reset button
      21. 1 x reset jumper
      22. 1 x Clear CMOS jumper
      23. 2 x temperature sensor headers
      24. Voltage Measurement Points
    • Back Panel Connectors
      1. 1 x Q-Flash Plus button
      2. 1 x Clear CMOS button
      3. 2 x SMA antenna connectors (2T2R)
      4. 1 x DisplayPort
      5. 1 x USB Type-C® port, with USB 3.2 Gen 1 support
      6. 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support
      7. 7 x USB 3.2 Gen 2 Type-A ports (red)
      8. 4 x USB 3.2 Gen 1 ports
      9. 1 x RJ-45 port
      10. 1 x optical S/PDIF Out connector
      11. 2 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
      7. Noise detection
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. E-ATX Form Factor; 30.5cm x 26.0cm

  • Gigabyte Z790 AORUS TACHYON (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12thGeneration Intel® Core™, Pentium® Gold and Celeron® Processors*
      2. L3 cache varies with CPU

      * Please refer to “CPU Support List” for more information.

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 8333(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 2 x DDR5 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® ALC1220-VB CODEC
        * The back panel line out jack supports DSD audio.
      2. Support for DTS:X® Ultra
      3. High Definition Audio
      4. 2/4/5.1/7.1-channel
      5. Support for S/PDIF Out
    • LAN
      1. Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Wireless Communication module

      Intel® Wi-Fi 6E AX210

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

      (Actual data rate may vary depending on environment and equipment.)

    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
      2. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x8 (PCIEX8)
        * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
      3. 4 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

    • USB

      Chipset:

      1. 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (1 port on the back panel, 1 port available through the internal USB header)
      2. 3 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
      3. 2 x USB 3.2 Gen 1 ports available through the internal USB header
      4. 4 x USB 2.0/1.1 ports available through the internal USB headers

      ASMedia® USB 3.2 Gen 2 Controller:

      1. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel

      Chipset+USB 3.2 Gen 1 Hub:

      1. 4 x USB 3.2 Gen 1 ports on the back panel
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x 6-pin OC_PEG power connector
      4. 1 x CPU fan header
      5. 1 x CPU fan/water cooling pump header
      6. 4 x system fan headers
      7. 2 x system fan/water cooling pump headers
      8. 2 x addressable LED strip headers
      9. 2 x RGB LED strip headers
      10. 4 x M.2 Socket 3 connectors
      11. 4 x SATA 6Gb/s connectors
      12. 1 x front panel header
      13. 1 x front panel audio header
      14. 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support
      15. 1 x USB 3.2 Gen 2 Type-A port (red)
      16. 1 x USB 3.2 Gen 1 header
      17. 2 x USB 2.0/1.1 headers
      18. 1 x noise detection header
      19. 2 x Thunderbolt™ add-in card connectors
      20. 2 x temperature sensor headers
      21. Voltage Measurement Points
      22. 1 x Clear CMOS jumper
      23. 1 x power button (PWR)
      24. 1 x reset button (RST)
      25. 1 x Clear CMOS button (CMOS)
      26. 1 x Cold Reset button (RTY)
      27. 1 x Protection Mode button (LIMP_MODE)
      28. 1 x CPU Ratio up button (CLK+)
      29. 1 x CPU Ratio down button (CLK-)
      30. 2 x BIOS switches (BIOS_SW/SB)
      31. 1 x OC Trigger switch (TGR)
      32. 1 x OC Ignition switch (OC_IGNITION)
    • Back Panel Connectors
      1. 1 x Q-Flash Plus button
      2. 1 x Protection Mode button
      3. 1 x PS/2 keyboard port
      4. 1 x PS/2 mouse port
      5. 2 x SMA antenna connectors (2T2R)
      6. 1 x HDMI port
      7. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
      8. 3 x USB 3.2 Gen 2 Type-A ports (red)
      9. 4 x USB 3.2 Gen 1 ports
      10. 1 x RJ-45 port
      11. 1 x optical S/PDIF Out connector
      12. 5 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
      7. Noise detection
    • BIOS
      1. 2 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. Support for DualBIOS™
      4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. E-ATX Form Factor; 30.5cm x 27.0cm

  • Gigabyte Z790 AORUS XTREME (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors*
      2. L3 cache varies with CPU

      * Please refer to “CPU Support List” for more information.

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s memory modules
      2. 4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor+Intel® Thunderbolt™ 4 Controller:

      1. 2 x Intel® Thunderbolt™ 4 connectors (USB Type-C® ports), supporting DisplayPort and Thunderbolt™ video outputs and a maximum resolution of 5120×2880@60 Hz with 24 bpp (via single display output)* Because of the limited I/O resources of the PC architecture, the number of Thunderbolt ™ devices that can be used is dependent on the number of the PCI Express devices being installed. (Refer to Chapter 2-6, “Back Panel Connectors,” for more information.)
        * Support for DisplayPort 1.4 version and HDCP 2.3

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. ESS ES9280AC DAC chip + 2 ESS ES9080 chips
      2. DTS® Sound Unbound™
      3. High Definition Audio
      4. 2-channel
      5. Support for S/PDIF Out
        * The line out jack and the optical S/PDIF out connector can only be used one at a time.
    • LAN
      1. Marvell® AQtion AQC107 10GbE LAN chip (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) (LAN1)
      2. Intel® 2.5GbE (2.5 Gbps/1 Gbps/100 Mbps) (LAN2)
    • Wireless Communication module

      Intel® Killer™ Wi-Fi 6E AX1690

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
        * Actual data rate may vary depending on environment and equipment.
    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * The PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot operates at up to x8 mode when a device is installed in the M2C_CPU connector.
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)
      2. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1)

      Support for AMD CrossFire™ technology (PCIEX16 and PCIEX4)

    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 2280/2260 SATA and PCIe 4.0 x4/ x2 SSD support) (M2M_SB)
      3. 4 x SATA 6Gb/s connectors

      RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices
      RAID 0, RAID 1, and RAID 10 support for SATA storage devices

    • USB

      Chipset+Intel® Thunderbolt™ 4 Controller:

      1. 2 x USB Type-C® ports on the back panel, with USB 3.2 Gen 2 support

      Chipset:

      1. 1 x USB Type-C® port with USB 3.2 Gen 2×2 support, available through the internal USB header
      2. 6 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

      Chipset+USB 3.2 Gen 2 Hub:

      1. 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

      Chipset+USB 3.2 Gen 1 Hub:

      1. 4 x USB 3.2 Gen 1 ports available through the internal USB headers

      Chipset+2 USB 2.0 Hubs:

      1. 4 x USB 2.0/1.1 ports available through the internal USB headers
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x CPU fan header
      4. 1 x water cooling CPU fan header
      5. 4 x system fan headers
      6. 4 x system fan/water cooling pump headers
      7. 1 x noise detection header
      8. 2 x integrated extension cable headers for addressable and RGB LED strips
      9. 4 x SATA 6Gb/s connectors
      10. 5 x M.2 Socket 3 connectors
      11. 1 x front panel header
      12. 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support
      13. 2 x USB 3.2 Gen 1 headers
      14. 1 x USB 2.0/1.1 header
      15. 2 x temperature sensor headers
      16. 1 x power button
      17. 1 x reset button
      18. 1 x Clear CMOS button
    • Back Panel Connectors
      1. 1 x Q-Flash Plus button
      2. 1 x OC Ignition button
      3. 2 x SMA antenna connectors (2T2R)
      4. 2 x Thunderbolt™ 4 connectors (USB Type-C® ports, with USB 3.2 Gen 2 support)
      5. 10 x USB 3.2 Gen 2 Type-A ports (red)
      6. 2 x RJ-45 ports
      7. 1 x optical S/PDIF Out connector
      8. 2 x audio jacks
        * The mic in jack supports only mono microphone input
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
      7. Noise detection
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. E-ATX Form Factor; 30.5cm x 28.5cm

  • Gigabyte Z790 GAMING X AX (rev. 1.x)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
      2. L3 cache varies with CPU

      (Please refer “CPU Support List” for more information.)

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.
      2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60
        * Support for DisplayPort 1.2 version and HDCP 2.3

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® Audio CODEC
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
      4. Support for S/PDIF Out
    • LAN
      1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Wireless Communication module

      Intel® Wi-Fi 6E AX210 (PCB rev. 1.0)

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

      Intel® Wi-Fi 6E AX211 (PCB rev. 1.1)

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

      (Actual data rate may vary depending on environment and equipment.)

    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
      2. 1 x PCI Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
      2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
      3. 6 x SATA 6Gb/s connectors
        * Refer to “2-8 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

      RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

    • USB

      Chipset:

      1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support
      2. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
      3. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
      4. 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)

      Chipset+2 USB 2.0 Hubs:

      1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x CPU fan header
      4. 1 x water cooling CPU fan header
      5. 3 x system fan headers
      6. 1 x system fan/water cooling pump header
      7. 2 x addressable LED strip headers
      8. 2 x RGB LED strip headers
      9. 4 x M.2 Socket 3 connectors
      10. 6 x SATA 6Gb/s connectors
      11. 1 x front panel header
      12. 1 x front panel audio header
      13. 1 x USB Type-C® header, with USB 3.2 Gen 2 support
      14. 1 x USB 3.2 Gen 1 header
      15. 2 x USB 2.0/1.1 headers
      16. 2 x Thunderbolt™ add-in card connectors
      17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      18. 1 x Q-Flash Plus button
      19. 1 x reset button
      20. 1 x reset jumper
      21. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 4 x USB 2.0/1.1 ports
      2. 2 x SMA antenna connectors (2T2R)
      3. 2 x USB 3.2 Gen 2 Type-A ports (red)
      4. 1 x DisplayPort
      5. 1 x HDMI 2.0 port
      6. 3 x USB 3.2 Gen 1 ports
      7. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
      8. 1 x RJ-45 port
      9. 1 x optical S/PDIF Out connector
      10. 2 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. ATX Form Factor; 30.5cm x 24.4cm

  • Gigabyte Z790 UD AX (rev. 1.0)

    Product Specifications

    • CPU
      1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
      2. L3 cache varies with CPU

      (Please refer “CPU Support List” for more information.)

    • Chipset
      1. Intel® Z790 Express Chipset
    • Memory
      1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
      2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
      3. Dual channel memory architecture
      4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
      5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
      6. Support for Extreme Memory Profile (XMP) memory modules

      (Please refer “Memory Support List” for more information.)

    • Onboard Graphics

      Integrated Graphics Processor-Intel® HD Graphics support:

      1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
        * Support for HDMI 2.0 version and HDCP 2.3.
      2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz
        * Support for DisplayPort 1.2 version and HDCP 2.3

      (Graphics specifications may vary depending on CPU support.)

    • Audio
      1. Realtek® Audio CODEC
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
      4. Support for S/PDIF Out
    • LAN
      1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
    • Wireless Communication module

      Intel® Wi-Fi 6E AX210

      1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
      2. BLUETOOTH 5.3
      3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

      (Actual data rate may vary depending on environment and equipment.)

    • Expansion Slots

      CPU:

      1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

      Chipset:

      1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4)
      2. 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1_4)
      3. 2 x PCI Express x1 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_2, PCIEX1_3)

      Support for AMD CrossFire™ technology (PCIEX16 and PCIEX4)

    • Storage Interface

      CPU:

      1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

      Chipset:

      1. 2 x M.2 connectors (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB, M2P_SB)
      2. 6 x SATA 6Gb/s connectors

      RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
      RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

    • USB

      Chipset:

      1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support
      2. 1 x USB Type-C® port with USB 3.2 Gen 1 support, available through the internal USB header
      3. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
      4. 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

      Chipset+2 USB 2.0 Hubs:

      1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
    • Internal I/O Connectors
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 1 x CPU fan header
      4. 1 x water cooling CPU fan header
      5. 3 x system fan headers
      6. 1 x system fan/water cooling pump header
      7. 2 x addressable LED strip headers
      8. 2 x RGB LED strip headers
      9. 3 x M.2 Socket 3 connectors
      10. 6 x SATA 6Gb/s connectors
      11. 1 x front panel header
      12. 1 x front panel audio header
      13. 1 x S/PDIF Out header
      14. 1 x USB Type-C® header, with USB 3.2 Gen 1 support
      15. 1 x USB 3.2 Gen 1 header
      16. 2 x USB 2.0/1.1 headers
      17. 1 x serial port header
      18. 2 x Thunderbolt™ add-in card connectors
      19. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
      20. 1 x reset button
      21. 1 x Q-Flash Plus button
      22. 1 x reset jumper
      23. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
      2. 1 x USB 3.2 Gen 2 Type-A port (red)
      3. 4 x USB 3.2 Gen 1 ports
      4. 4 x USB 2.0/1.1 ports
      5. 2 x SMA antenna connectors (2T2R)
      6. 1 x HDMI 2.0 port
      7. 1 x DisplayPort
      8. 1 x RJ-45 port
      9. 3 x audio jacks
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. Voltage detection
      2. Temperature detection
      3. Fan speed detection
      4. Water cooling flow rate detection
      5. Fan fail warning
      6. Fan speed control
        * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
    • BIOS
      1. 1 x 256 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Unique Features
      1. Support for GIGABYTE Control Center (GCC)
        * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      2. Support for Q-Flash
      3. Support for Q-Flash Plus
      4. Support for Smart Backup
    • Bundled Software
      1. Norton® Internet Security (OEM version)
      2. LAN bandwidth management software
    • Operating System
      1. Support for Windows 11 64-bit
      2. Support for Windows 10 64-bit
    • Form Factor
      1. ATX Form Factor; 30.5cm x 24.4cm

  • MAG B650 TOMAHAWK WIFI

    CHIPSET AMD B650
    CPU SUPPORT Supports AMD Ryzen™ 7000 Series Desktop Processors
    Socket AM5
    MEMORY 4x DDR5, Maximum Memory Capacity 128GB
    Memory Support DDR5 6600+(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5800(OC)/ 5600(OC)/ 5400(OC)/ 5200(OC)/ 5000(OC)/ 4800(JEDEC) MHz
    ONBOARD GRAPHICS 1x HDMI™
    1x DisplayPort
    Support HDMITM 2.1 with HDR, maximum resolution of 4K 60Hz*
    Support DP 1.4, maximum resolution of 8K 60Hz*
    *Available only on processors featuring integrated graphics. Graphics specifications may vary depending on the CPU installed.
    EXPANSION SLOT 2x PCI-E x16 slot
    Support x16/ x4
    1x PCI-E x1 slot
    PCI_E1 Gen PCIe 4.0 supports up to x16 (From CPU)
    PCI_E2 Gen PCIe 4.0 supports up to x2 (From Chipset)
    PCI_E3 Gen PCIe 3.0 supports up to x1 (From Chipset)
    STORAGE 3x M.2
    M.2_1 Source (From CPU) supports up to PCIe 4.0 x4 , supports 2280/2260 devices
    M.2_2 Source (From CPU) supports up to PCIe 4.0 x4 , supports 2280/2260 devices
    M.2_3 Source (From Chipset) supports up to PCIe 4.0 x4 , supports 2280/2260 devices
    6x SATA 6G
    RAID Supports RAID 0, RAID 1, and RAID 10 for SATA storage devices*
    Supports RAID 0 and RAID 1 for M.2 NVMe storage devices
    * SATA_A1_A2 do not support RAID function.
    USB 2x USB 2.0 (Rear)
    4x USB 2.0 (Front)
    4x USB 3.2 Gen1 Type A (Rear)
    2x USB 3.2 Gen1 Type A (Front)
    3x USB 3.2 Gen2 Type A (Rear)
    1x USB 3.2 Gen2 Type C (Front)
    1x USB 3.2 Gen2x2 Type C (Rear)
    LAN Realtek® RTL8125B 2.5Gbps LAN
    WIRELESS / BLUETOOTH AMD Wi-Fi 6E
    The Wireless module is pre-installed in the M.2 (Key-E) slot
    Supports MU-MIMO TX/RX
    Supports 20MHz, 40MHz, 80MHz,160MHz bandwidth in 2.4GHz/ 5GHz or 6GHz* bands
    Supports 802.11 a/ b/ g/ n/ ac/ ax

    Supports Bluetooth® 5.2**

    “* Wi-Fi 6E 6GHz may depend on every country’s regulations and will be ready in Windows 10 build 21H1 and Windows 11.
    ** Bluetooth 5.2 will be ready in Windows 10 build 21H1 and Windows 11.    “
    AUDIO Realtek® ALC4080 Codec
    7.1-Channel High Performance Audio
    Supports S/PDIF output
    Supports up to 32-Bit/384 kHz playback on front panel
    INTERNAL I/O 1x Power Connector(ATX_PWR)
    2x Power Connector(CPU_PWR)
    1x CPU Fan
    1x Pump Fan
    6x System Fan
    2x Front Panel (JFP)
    1x Chassis Intrusion (JCI)
    1x Front Audio (JAUD)
    1x Tuning Controller connector(JDASH)
    2x Addressable V2 RGB LED connector (JARGB_V2)
    2x RGB LED connector(JRGB)
    1x TPM pin header(Support TPM 2.0)
    4x USB 2.0 ports
    2x USB 3.2 Gen1 Type A ports
    1x USB 3.2 Gen2 Type C ports
    LED FEATURE 4x EZ Debug LED
    BACK PANEL PORTS

    1. DisplayPort 1.4
    2. 2.5G LAN Port
    3. USB 2.0 Port
    4. USB 3.2 Gen 1 5Gbps Type-A
    5. Wi-Fi / Bluetooth Antenna
    6. HD Audio Connectors
    7. Flash BIOS Button
    8. HDMI™ 2.1 Port
    9. USB 3.2 Gen 2 10Gbps Type-A
    10. USB 3.2 Gen 2×2 20Gbps Type-C
    11. Optical S/PDIF OUT
    OPERATING SYSTEM Support for Windows® 11 64-bit, Windows® 10 64-bit
    PCB DIMENSION ATX
    243.84mmx304.8mm

  • MAG B650M MORTAR WIFI

    CHIPSET AMD B650
    CPU SUPPORT Supports AMD Ryzen™ 7000 Series Desktop Processors
    Socket AM5
    MEMORY 4x DDR5, Maximum Memory Capacity 128GB
    Memory Support DDR5 6400+(OC)/ 6200(OC)/ 6000(OC)/ 5800(OC)/ 5600(OC)/ 5400(OC)/ 5200(OC)/ 5000(OC)/ 4800(JEDEC) MHz
    ONBOARD GRAPHICS 1x HDMI™
    1x DisplayPort
    Support HDMITM 2.1 with HDR, maximum resolution of 4K 60Hz*
    Support DP 1.4, maximum resolution of 8K 60Hz*
    *Available only on processors featuring integrated graphics. Graphics specifications may vary depending on the CPU installed.
    EXPANSION SLOT 2x PCI-E x16 slot
    Supports x16/x4
    1x PCI-E x1 slot
    PCI_E1 Gen PCIe 4.0 supports up to x16 (From CPU)
    PCI_E2 Gen PCIe 3.0 supports up to x1 (From Chipset)
    PCI_E3 Gen PCIe 4.0 supports up to x4 (From Chipset)
    STORAGE 2x M.2
    M.2_1 Source (From CPU) supports up to PCIe 4.0 x4 , supports 2280/2260 devices
    M.2_2 Source (From CPU) supports up to PCIe 4.0 x4 , supports 2280/2260 devices
    6x SATA 6G
    RAID Supports RAID 0, RAID 1, and RAID 10 for SATA storage devices*
    Supports RAID 0 and RAID 1 for M.2 NVMe storage devices
    * SATA_A1_A2 do not support RAID function.
    USB 4x USB 2.0 (Front)
    4x USB 3.2 Gen1 Type A (Rear)
    2x USB 3.2 Gen1 Type A (Front)
    3x USB 3.2 Gen2 Type A (Rear)
    1x USB 3.2 Gen2 Type C (Front)
    1x USB 3.2 Gen2x2 Type C (Rear)
    LAN Realtek® RTL8125B 2.5Gbps LAN
    WIRELESS / BLUETOOTH AMD Wi-Fi 6E
    The Wireless module is pre-installed in the M.2 (Key-E) slot
    Supports MU-MIMO TX/RX
    Supports 20MHz, 40MHz, 80MHz,160MHz bandwidth in 2.4GHz/ 5GHz or 6GHz* bands
    Supports 802.11 a/ b/ g/ n/ ac/ ax

    Supports Bluetooth® 5.2**

    * Wi-Fi 6E 6GHz may depend on every country’s regulations and will be ready in Windows 10 build 21H1 and Windows 11.
    ** Bluetooth 5.2 will be ready in Windows 10 build 21H1 and Windows 11.
    AUDIO Realtek® ALC4080 Codec
    7.1-Channel High Performance Audio
    Supports S/PDIF output
    Supports up to 32-Bit/384 kHz playback on front panel
    INTERNAL I/O 1x Power Connector(ATX_PWR)
    2x Power Connector(CPU_PWR)
    1x CPU Fan
    1x Pump Fan
    3x System Fan
    2x Front Panel (JFP)
    1x Chassis Intrusion (JCI)
    1x Front Audio (JAUD)
    1x Tuning Controller connector(JDASH)
    2x Addressable V2 RGB LED connector (JARGB_V2)
    2x RGB LED connector(JRGB)
    1x TPM pin header(Support TPM 2.0)
    4x USB 2.0 ports
    2x USB 3.2 Gen1 Type A ports
    1x USB 3.2 Gen2 Type C ports
    LED FEATURE 4x EZ Debug LED
    BACK PANEL PORTS

    1. DisplayPort 1.4
    2. 2.5G LAN Port
    3. USB 3.2 Gen 2 10Gbps Type-A
    4. USB 3.2 Gen 1 5Gbps Type-A
    5. Wi-Fi / Bluetooth Antenna
    6. HD Audio Connectors
    7. Flash BIOS Button
    8. HDMI™ 2.1 Port
    9. USB 3.2 Gen 2×2 20Gbps Type-C
    10. Optical S/PDIF OUT
    OPERATING SYSTEM Support for Windows® 11 64-bit, Windows® 10 64-bit
    PCB DIMENSION mATX
    243.84mmx243.84mm

  • MAG B660 TOMAHAWK WIFI

    PROCESSOR

    • Supports 12th/ 13th Gen Intel® Core™, Pentium® Gold and Celeron® processors 1
    • Processor socket LGA1700
    1. Please go to msi.com to get the newest support status as new processors are released.

    See supported processors

    CHIPSET

    Intel® B660 Chipset

    MEMORY

    • 4x DDR5 memory slots, support up to 128GB 1
    • Supports 1R 4800 MHz (by JEDEC & POR)
    • Max overclocking frequency:
      • 1DPC 1R Max speed up to 6200+ MHz
      • 1DPC 2R Max speed up to 6000+ MHz
      • 2DPC 1R Max speed up to 5600+ MHz
      • 2DPC 2R Max speed up to 5600+ MHz
    • Supports Intel® XMP 3.0 OC
    • Supports Dual Controller Dual-Channel mode
    • Supports non-ECC, un-buffered memory
    1. Please refer to www.msi.com for more information on compatible memory.

    See supported memory

    EXPANSION SLOT

    • 2x PCIe x16 slots
      • PCI_E1 (From CPU)
        • Support up to PCIe 4.0
      • PCI_E2 (From B660 chipset)
        • Support up to PCIe 3.0 x4
    • 1x PCIe 3.0 x1 slot (From B660 chipset)

    MULTI-GPU

    • Supports AMD® CrossFire™ Technology

    ONBOARD GRAPHICS

    • 1x HDMI 2.1 with HDR port, supports a maximum resolution of 4K 60Hz 1 / 2
    • 1x DisplayPort 1.4 port with HBR3, supports a maximum resolution of 4K 60Hz 1 / 2
    1. Available only on processors featuring integrated graphics.
    2. Graphics specifications may vary depending on the CPU installed.

    STORAGE

    • 6x SATA 6Gb/s ports
      • SATA5~8 (From B660 chipset)
      • SATAA~B (From ASM1061)
    • 3x M.2 slots (Key M)
      • M2_1 slot (From CPU)
        • Supports up to PCIe 4.0 x4
        • Supports 2242/ 2260/ 2280/ 22110 storage devices
      • M2_2 & M2_3 slots (From B660 chipset)
        • M2_2 supports up to PCIe 4.0 x4
        • M2_3 supports up to PCIe 4.0 x2 1
        • Supports SATA up to 6Gb/s
        • Supports 2242/ 2260/ 2280 storage devices
        • Supports Intel® Optane™ Memory
    • Supports Intel® Smart Response Technology for Intel Core™ processors
    1. SATA7 will be unavailable when installing M.2 SATA SSD in the M2_3 slot.

    RAID

    • Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA storage devices 1
    1. SATAA & SATAB do not support RAID function.

    USB

    Intel® B660 Chipset

    • 1x USB3.2 Gen 2×2 20Gbps port (Type-C port on the back panel)
    • 5x USB 3.2 Gen 2 10Gbps ports (4 Type-A ports on the back panel, 1 Type-C available through the internal connector)
    • 2x USB 3.2 Gen 1 5Gbps Type-A ports available through the internal connector
    • 8x USB 2.0 ports (4 Type-A ports on the back panel, 4 Type-A ports available through the internal connectors)

    AUDIO

    Realtek® ALC1220P Codec

    • 7.1-Channel High Definition Audio
    • Supports S/PDIF output

    LAN

    • 1x Realtek® RTL8125B-CG 2.5Gbps LAN controller

    WIRELESS LAN & BLUETOOTH®

    Intel® Wi-Fi 6E

    • The Wireless module is pre-installed in the M.2 (Key-E) slot
    • Supports MU-MIMO TX/RX, 2.4GHz/ 5GHz/ 6GHz 1 (160MHz) up to 2.4Gbps
    • Supports 802.11 a/ b/ g/ n/ ac/ ax
    • Supports Bluetooth® 5.2 2, FIPS, FISMA
    1. Wi-Fi 6E 6GHz may depend on every country’s regulations and will be ready in Windows 10 build 21H1 and Windows 11.
    2. Bluetooth 5.2 will be ready in Windows 10 build 21H1 and Windows 11.

    INTERNAL CONNECTORS

    • 1x 24-pin ATX main power connector
    • 2x 8-pin ATX 12V power connectors
    • 6x SATA 6Gb/s connectors
    • 3x M.2 slots (M-Key)
    • 1x USB 3.2 Gen 2 10Gbps Type-C port
    • 1x USB 3.2 Gen 1 5Gbps connector (supports additional 2 USB 3.2 Gen 1 5Gbps ports)
    • 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
    • 1x 4-pin CPU fan connector
    • 1x 4-pin water-pump fan connector
    • 5x 4-pin system fan connectors
    • 1x Front panel audio connector
    • 2x System panel connectors
    • 1x Chassis Intrusion connector
    • 1x Clear CMOS jumper
    • 1x TPM module connector
    • 1x TBT connector (supports RTD3)
    • 1x Tuning Controller connecto

    LED FEATURE

    • 2x 4-pin RGB LED connectors
    • 2x 3-pin RAINBOW LED connectors
    • 4x EZ Debug LED

    BACK PANEL PORTS

    1. USB 2.0 Port
    2. DisplayPort 1.4
    3. 2.5G LAN Port
    4. Wi-Fi / Bluetooth Antenna
    5. HD Audio Connectors
    6. HDMI 2.1 Port
    7. USB 3.2 Gen 2 10Gbps Type-A
    8. USB 3.2 Gen 2×2 20Gbps Type-C
    9. Optical S/PDIF OUT
    MAG B660 TOMAHAWK WIFI back panel ports

    DIMENSIONS

    • ATX Form Factor
    • 12 in. x 9.6 in. (30.5 cm x 24.4 cm)