Cabinets

The CORSAIR 7000D AIRFLOW is a full-tower ATX case for the most ambitious builds, offering incredible cooling potential with an airflow- optimized steel front panel, hidden cable management, and three included CORSAIR AirGuide fans.

XPLORE THE 7000D AIRFLOW 

The roomy interior, massive airflow, and smart design of the 7000D AIRFLOW opens up a world of possibilities for creative and unforgettable builds.

GET SOME BREATHING ROOM 

The 7000 series is one of the most fully-featured full-towers on the market, with massive expansion capabilities.

FAN CAPACITY, RADIATOR CAPACITY 

Up to three simultaneous 360mm radiators (roof, side, front), two simultaneous 420mm radiators (roof, front), or even a 480mm radiator (side) means you can design your dream loop.
120MM
140MM

BUILD YOUR MASTERPIECE 

The CORSAIR 7000D AIRFLOW is a full-tower ATX case for the most ambitious builds, with an airflow-optimized steel front panel for maximum air intake and three included 140mm AirGuide fans. CORSAIR RapidRoute cable management easily keeps your cables hidden from sight, while a massive interior enables a multitude of cooling options, including room for up to three simultaneous 360mm radiators.

A FULLY-FEATURED FULL-TOWER 

Even in cases as big as these, it’s the little things that make all the difference. From flexible storage and cooling options to tool-free swing-out side panels and clean cable management, every element of the 7000 Series helps you make your most ambitious build a reality.

POWERFUL DIRECTED AIRFLOW 

Equipped with three included CORSAIR 140mm AirGuide fans with anti-vortex vanes for concentrated airflow.

TAKE COMMAND OF YOUR COOLING 

A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.

ALL-AROUND EASY ACCESS

Two steel high-airflow panels and a sturdy 4mm thick tempered glass side panel offer outstanding airflow and a clear view of your system.

THREE-SLOT VERTICAL GPU MOUNT 

Put the spotlight on your graphics card with an innovative vertical GPU mount, big enough to fit today’s most powerful graphics cards with plenty of room for airflow.

SHOW US WHAT YOU’VE GOT 

A removable, customizable windowed PSU shroud shows off the heart of your system. Remove the panel, add vinyl graphics, laser-etch your own logo, or add backlighting to make your rig stand out.

CORSAIR RAPIDROUTE CABLE MANAGEMENT 

Quickly and easily route your major cables through a single hidden channel, with a roomy 25mm of space behind the motherboard for all of your cables, easily concealed by a hinged steel door.

ALL THE STORAGE YOU NEED

4X 2.5IN SSDS
6X 3.5IN HDDS

MODERN FRONT PANEL I/O
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 4x USB 3.0 port, and a combination audio/microphone jack.

Power button
4x USB 3.0 ports
USB 3.1 Type-C port
Headphone/Mic Combo Jack
Reset Button

Specifications

Specification

Features

The essential gaming PC case.

Carbide Series SPEC-01 is proof that great looks, smart design, and durable construction don’t need to be pricy, and that basic doesn’t need to be boring. You get aggressive styling, a huge side panel window for admiring your components, and an LED-lit front intake fan that draws cool air directly to your graphics cards.

Inside, there’s room for up to five fans, and the four combination hard drive / SSD trays make storage installation and upgrades quick and easy. Cable routing cutouts help you reduce clutter, and the built-in dust filters help protect your components. Up front, the USB 3.0 connector gets you up to speed with the latest high-performance storage devices.

Huge side panel window

The aggressive look of the SPEC-01 makes it look great on the outside, but there’s beauty on the inside of a well-built system, too. The large side panel window lets you show it off.

LED front intake fan, with room for more

The 120mm front intake fan is bathed in soft LED lighting, and it’s oriented to draw cool air directly across your graphics cards. And if you want even more ventilation, you can add a second 120mm fan or even dual 140mm fans.

Flexible cooling potential

Like all Corsair cases, the SPEC-01 is designed for cooling, so you’re covered if you’re overclocking, running multiple GPUs, or if you just want more airflow. There are mounting points for up to five fans, including dual front 140mm or 120mm fans, dual 120mm fans on top, and a rear 120mm fan.

Multiple drive bays

You might not build a system with four hard drives or SSDs, but with SPEC-01, you can if you want. In addition to the two standard 5.25” optical drive bays, there are four built-in 3.5” / 2.5” combo drive bays for mechanical hard drives or solid-state drives.

Easy system builds maintenance and upgrades

Builds should be easy, no matter what your budget. 3.5” drive installation is tool-free, and you get cable routing holes for neater-looking builds and better airflow. And, there’s a CPU cutout to allow for cooling upgrades without removing the motherboard. The front intake fan filters help keep dust out of the interior, and the front panel has a USB 3.0 port for fast performance from USB flash drives and portable hard drives.

Specifications

Features:

OPTIMIZED THERMAL MANAGEMENT

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system.

Included Fans

Pre-installed fans ensure the case runs at peak performance.

Honeycomb vents

The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.

Ultimate cooling system scenario

With two 200MM fans mounted outside of the frame, you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.

STUNNING PC ILLUMINATION

Move air stylishly with ARGB effects

Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.

Highlighted logo

The LIAN LI logo glows in sync with the fans.

Experience ARGB control via one button

The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.

ARGB synchronization with the motherboard

Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.

Pre-installed fan hub

The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.

Plenty of space for cable management

The 22MM thick space behind the motherboard ensures the cables fit in well.

Keep the cable nice and neat

The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.

E-ATX Motherboard Compatible

Fits motherboards with a maximum width of 280MM.

Removable/adjustable cage supports

2 x 3.5” HDD or 1 x 3.5” HDD + 1 x 2.5” SSD

SIMPLE DUST MANAGEMENT

The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.

Specifications:

Features:

BORN TO PUSH THE LIMITS

LANCOOL II MESH RGB features a mesh front panel and mesh bottom left shroud panel,honeycomb vent design and built-in RGB fans,ensuring bountiful airflow delivered to your high-performance components while adorning the system with an RGB touch.

THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

• Premium look
• Unprecedented modularity
• Hinged flip panels all around
• Optimized cooling support
• Cable management with ease
• Optimized storage configuration

MORE ADVANCED COOLING SUPPORT

The optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance ARGB cooling fans.

HIGH-PERFORMANCE BUILT-IN ARGB FANs

3 x 120mm ARGB intake fans pre-installed at the front produce ample airflow while still offering bountiful RGB to liven up your PC build.

ULTIMATE COOLING SUPPORT

Add the BORA DIGITAL ARGB FANs to have more vibrant RGB and increased cooling efficiency for your LANCOOL II MESH build!

EXPERIENCE ARGB CONTROL ON A WHOLE NEW LEVEL

Lighting effects of the 3 included ARGB fans can be fully controlled through the C button and M button located on the top front. Switching between 8 lighting modes has never been this easy.

Note!
By plugging the fan hub’s ARGB header into the motherboard’s 3-PIN 5V addressable RGB headers, you’ll be able to synchronise the lighting effects with the motherboard software by switching the M button to the 8th mode.

Note!
If your motherboard doesn’t have any 5V addressable RGB headers, make sure to connect the SATA cable connecting the hub to the the power supply and use the C and M buttons to control the lighting effects.

MODULAR PSU SHROUD COVER

The space between the top and bottom chamber now features two removable PSU shroud covers for either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.

Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.

When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.

Even when 2 x SSDs are mounted, the vents on  the PSU shroud covers guarantee good ventilation.

MULTI-WAY FAN/RADIATOR BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

HOW TO INSTALL THE MULTI-WAY FAN/RAD BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your need.

ATTENTION!
Do not install a 140/280MM radiator in the inner side of the bracket otherwise irreparable deformation might occur. The correct way to install is to mount fans first then place a radiator on top of the fans.

OPTIMIZED STORAGE CONFIGURATION

With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.

REMOVABLE TWO-WAY CABLE MANAGEMENT BAR

Flippable, flexible, multi-functional

FLIP PANELS AND SHROUDs ALL AROUND

The tempered glass side panels offer an unobstructed view to the interior configuration while the bottom shroud panels provide quick access to PSU/drive installation.

CABLE MANAGEMENT WITH EASE

The cover plates save users neck and fingers by concealing nearly all the wayward cables.

MESH PANEL KIT

Mesh front panel is available for those LANCOOL II users craving to upgrade their system by swapping to a mesh front panel.

Specifications: